Skip to main content

4.5 Using quill

Advanced
Tutorial

Overview​

Now that you've covered both the ICP ledger and the NNS, it's time to take a look at a CLI tool that can be used to interact with both. Quill is a ledger and governance toolkit that provides support for self-custody of ICP or ckBTC tokens and functionality to interact with the NNS, SNSs, and ICP ledger from a cold wallet.

To hold tokens or digital assets, there are three types of wallet options you can use:

  • Centralized wallet services: A wallet service owned and operated by a centralized third-party, such as a centralized exchange. On a centralized wallet service, the user is not in control of the wallet's private key.

  • Hot wallets: Any wallet that uses an application on a device connected to the internet. With hot wallets, users are in full control of their wallet's private key.

Cold wallets: A wallet that uses an offline device that is not connected to the internet. Like hot wallets, cold wallets also provide users with full control of the wallet's private key.

Each of these options has its benefits, but there is an equal tradeoff between convenience and security. For example, while cold wallets are quite secure since they do not have access to the internet and are safe from malicious cyber attacks, they is not convenient to use since there must be additional steps taken to move the assets to a hot wallet or centralized wallet in order to spend and trade the assets. The opposite is true for hot wallets; while they are convenient to use, they are susceptible to attacks.

Read more about different types of self-custody wallet options in the documentation.

In this tutorial, you'll take a look at how to use quill for workflows like interacting with the ICP ledger, sending or receiving ckBTC, and interacting with the NNS and neurons.

What is quill?​

Quill is a CLI tool used for interacting with ICP's governance and ledger canisters. A unique feature of quill is the ability to create signed messages on a cold wallet. Once these messages are created, they must be transferred to an online computer, however, in order for them to take effect on the mainnet. This is possible because ICP uses cryptographically verifiable messages.

To support cold wallets, quill uses two separate steps to send query and update calls to ICP. First, quill generates a transaction payload and signs the message according to the quill subcommand and its arguments. This step does not require a connection to the internet. Then, the quill send command is used to submit the transaction payload to ICP, which requires an internet connection. To connect to the internet, users will need to transport the signed message payload, which is returned in JSON or QR code format, from the cold wallet computer to an online computer.

While it is important to know that quill supports cold wallet workflows, it can also be used on a computer connected to the internet without using any cold wallet workflows.

Transactions that use query requests, such as obtaining an account's balance or returning proposal information, require an internet connection and cannot be run on cold wallets. This is because submitting these query calls locally would not return data, since the mainnet canisters being queried are not running on the local replica. Additionally, query calls do not require the same cryptographic validity that update calls do; therefore, they do not need a signature to be generated and can be submitted directly to the mainnet.

In this tutorial, you'll see that query calls do not generate JSON output and can be submitted directly to the mainnet, while update calls will generate a JSON response that must be saved and submitted using quill send.

Downloading and installing quill​

To install quill on a cold wallet, you can either follow the steps below and then disconnect the computer from the internet, or you can download the release file and transport it to the offline machine using a device such as a USB flash drive.

In this tutorial, it will be assumed that you will be using quill on a machine with an internet connection, but this tutorial will include notes with information for cold wallet workflows.

First, start by downloading the latest quill release from GitHub.

This tutorial will showcase the macOS steps; please see the instructions here for Linux and Windows.

Then, move the file to the /usr/local/bin directory to use it in the CLI:

mv quill-macos-x86_64 /usr/local/bin/quill

Next, give the file executable permissions:

chmod +x /usr/local/bin/quill

Check that quill is now available for use by running the command:

quill -h

Using quill's basic commands​

First, you need an account to use with quill. You can create a new account or you can use an existing ledger account. To create a new account, generate the account's private key by running the command:

quill generate

This command will return the principal and account IDs for our newly generated private key:

Principal id: hzpq4-g6feu-vbvwx-oeo5c-fjiz4-de4bq-7q4y2-rldok-whjrq-mnayv-mqe
Legacy account id: 438f6fdc8e33539bbf73625c141cfbfa4b41fd943595f8e1ccd0b8c9e9758772

Alternatively, you can use a private key file for our existing ledger account with an ICP balance. To use an existing ledger account, you will need the account's .pem file. To get this .pem file, you can use the dfx identity export command. First, assure that you're using the dfx identity you intend to be:

dfx identity whoami

Then, export the identity's .pem file with the command:

dfx identity export default > my_identity.pem

In this command, the > character indicates that you want to save the output of dfx identity export default to a file called my_identity.pem.

Then, you can pass this .pem file into our quill commands with the flag --pem-file my_identity.pem.

Next, let's use quill to get our account's balance. Use the following command:

quill --pem-file my_identity.pem account-balance PRINCIPAL_ID

Replace PRINCIPAL_ID with the principal value returned from the command dfx identity get-principal for the identity that you generated the .pem file for.

Running query commands with quill will generate the transaction, then ask if you'd like to send the message or not, such as:

Sending message with

  Call type:   update
  Sender:      2vxsx-fae
  Canister id: ryjl3-tyaaa-aaaaa-aaaba-cai
  Method name: icrc1_balance_of
  Arguments:   (
  record {
    owner = principal "hzpq4-g6feu-vbvwx-oeo5c-fjiz4-de4bq-7q4y2-rldok-whjrq-mnayv-mqe";
    subaccount = null;
  },
)

Do you want to send this message? [y/N]

This subcommand, account-balance, cannot be run on offline machines, so selecting 'N' will cancel the request. Selecting 'Y' will query the mainnet for the result, which will be returned such as:

Request ID: 0x7c8e03ccaa28ad463cd568cc52b14d5c7739fa81039d4548e34818e333d5e752
The request is being processed...
The request is being processed...
The request is being processed...
(100_000_000 : nat)

Now, if you want to transfer ICP to another account, you can use the command:

quill --pem-file my_identity.pem transfer --amount AMOUNT ACCOUNT_ID

To use the quill transfer command, you need to have a balance of ICP. ICP can be bought through a crypto exchange, or ICP can be received through community activities such as participating in the NNS governance and receiving developer grants.

Replace AMOUNT with the numerical number of how many ICP tokens to transfer, and replace ACCOUNT_ID with the account ID that should receive the ICP. For example:

quill --pem-file my_identity.pem transfer --amount 0.5 365cf45f3521653e866a078b157a8d8701c3f63183a6d41ff8ddb913c4a978d3

This command will output the transaction's JSON content. This content can be saved to a file and then submitted as a transaction, such as:

quill --pem-file identity.pem transfer --amount 0.5 365cf45f3521653e866a078b157a8d8701c3f63183a6d41ff8ddb913c4a978d3 > transfer_transaction.json
quill --pem-file identity.pem send transfer_transaction.json

Then you'll be prompted to confirm that you'd like to submit this transaction to the mainnet. On a cold wallet, the transfer_transaction.json file can be transferred to an online machine to be sent with the quill --pem-file my_identity.pem send transfer_transaction.json command.

Using quill with ckBTC​

Quill can be used for interacting with ckBTC. To get started, check the ckBTC balance of your ledger account with the command:

quill ckbtc balance --of PRINCIPAL_ID

Replace PRINCIPAL_ID with the principal ID for the identity you want to use.

Like the account-balance command, the quill ckbtc balance command cannot be run on offline machines, so selecting 'N' will cancel the request. Selecting 'Y' will query the mainnet for the result, which will be returned such as:

Request ID: 0xbdeef0e77df3c032b9c63d5c0e08aa766bfb33d81ab2b5f783ce0c7eafdccb58
The request is being processed...
The request is being processed...
(0 : nat)

Then, to retrieve BTC in exchange for ckBTC use the command:

quill ckbtc retrieve-btc WITHDRAW_ADDRESS --satoshis AMOUNT > retrieve_transaction.json

Replace PRINCIPAL_ID with your principal ID, and replace AMOUNT with the number of Satoshis to retrieve.

Then, to submit this transaction, run the command:

quill send retrieve_transaction.json

The output confirming the transaction will resemble the following:

Sending message with

  Call type:   update
  Sender:      2vxsx-fae
  Canister id: mxzaz-hqaaa-aaaar-qaada-cai
  Method name: icrc1_transfer
  Arguments:   (
  record {
    to = record {
      owner = principal "mqygn-kiaaa-aaaar-qaadq-cai";
      subaccount = opt blob "\0e\b6\de\93\b1y\ae\83+\b3\22\e8\e3\d6\84f0\04E\cb=\e5\b8\afy\bb\8dL\bc\ea\96\d0";
    };
    fee = null;
    memo = null;
    from_subaccount = null;
    created_at_time = opt (1_697_834_874_304_780_000 : nat64);
    amount = 1_000 : nat;
  },
)

Do you want to send this message? [y/N]

With quill, you can also transfer ckBTC to another address with the command:

quill ckbtc transfer PRINCIPAL_ID --satoshis AMOUNT > ckBTC_transfer_transaction.json

Then, to submit this transaction, run the command:

quill send ckBTC_transfer_transaction.json

The output confirming the transaction will resemble the following:

Sending message with

  Call type:   update
  Sender:      2vxsx-fae
  Canister id: mxzaz-hqaaa-aaaar-qaada-cai
  Method name: icrc1_transfer
  Arguments:   (
  record {
    to = record {
      owner = principal "hzpq4-g6feu-vbvwx-oeo5c-fjiz4-de4bq-7q4y2-rldok-whjrq-mnayv-mqe";
      subaccount = null;
    };
    fee = null;
    memo = null;
    from_subaccount = null;
    created_at_time = opt (1_697_835_095_032_290_000 : nat64);
    amount = 1_000 : nat;
  },
)

Do you want to send this message? [y/N]

Using quill with the NNS​

Quill can be used with the NNS and any SNS that has been launched on ICP.

In the previous module, 4.4 NNS governance and staking, you took a look at how to interact with the NNS and neurons through the NNS dapp. Now, let's look at how to use quill instead.

First, let's get some information about a neuron. You'll need a neuron's ID, which you can find on the NNS dapp, as you took a look at in the last module:

Neuron ID

Then, you can use the command:

quill get-neuron-info NEURON_ID

Replace NEURON_ID with the ID of a neuron. Since this command is a query command, it cannot be run on offline machines, so selecting 'N' will cancel the request. Selecting 'Y' will query the mainnet for the result, which will be returned such as:

Request ID: 0xf8fa04049bb2d0f968203e008427301f8a6d49018c50647d44f26eabf0fdd114
The request is being processed...
The request is being processed...
The request is being processed...
The request is being processed...
(
  variant {
    Ok = record {
      dissolve_delay_seconds = 252_383_885 : nat64;
      recent_ballots = vec {};
      created_timestamp_seconds = 1_697_751_704 : nat64;
      state = 2 : int32;
      stake_e8s = 200_000_000 : nat64;
      joined_community_fund_timestamp_seconds = null;
      retrieved_at_timestamp_seconds = 1_697_835_643 : nat64;
      known_neuron_data = null;
      voting_power = 399_939_067 : nat64;
      age_seconds = 0 : nat64;
    }
  },
)

To create a new neuron owned by the identity you're using with quill, run the following quill neuron-stake command to stake ICP in a neuron:

quill --pem-file my_identity.pem neuron-stake --amount AMOUNT --name NAME > stake_neuron.json

Replace AMOUNT with the amount of ICP to stake in the neuron, and replace NAME with the name of the neuron.

Then, submit the command with:

quill send stake_neuron.json

Now, to get a list of all neurons that belong to your identity's principal, run the command:

quill --pem-file my_identity.pem list-neurons > list_neurons.json

Then, submit the command with:

quill send list_neurons.json

Your neuron's details will be returned:

Neuron 16528081201153361936
Aging since: 54 years, 7 months, 7 days, 6 hours, 32 minutes, 29 seconds
Staked ICP: 1.00000000 ICP
State: NotDissolving
Dissolve delay: 1 day, 3 hours, 46 minutes, 40 seconds
Created Aug 08 2024 20:00:32 UTC
Controller: hoqq7-3eo6j-dee4s-aiabk-6rqxw-kwgyo-rhru7-bdgmk-k5ipv-chkhx-cqe
KYC verified: Yes

To manage your neuron and make a configuration change to it, you can use the command:

quill --pem-file my_identity.pem neuron-manage NEURON_ID <arguments>

For a full list of arguments to use with this command, use quill neuron-manage --help for the full list. For example, to increase the dissolve delay of your neuron, run the command:

quill --pem-file my_identity.pem neuron-manage 16528081201153361936 --additional-dissolve-delay-seconds 100000 > manage_neuron.json

Then, submit the command with:

quill send manage_neuron.json

Lastly, quill can be used to get information about the NNS's current proposals. For example, to list currently pending proposals, run the command:

quill list-proposals --limit 3

The --limit command is used to limit how many are returned; in this command the most recent 3 proposals are returned. Since this command is a query command, it cannot be run on offline machines, so selecting 'N' will cancel the request. Selecting 'Y' will query the mainnet for the result, which will be returned such as:

...
Proposed action: Execute NNS function NnsCanisterUpgrade
Payload:
Proposal ID: 131695
Created at Aug 08 2024 15:49:41 UTC by neuron 73
Status: Open, reward status: AcceptVotes
Deadline: Aug 12 2024 15:49:41 UTC
Rejection cost: 10.00000000 ICP
Current tally: Y 3192928.36102570 (0.67%), N 330234.78091090 (0.07%) as of Aug 08 2024 21:28:57 UTC

"Update subnet pzp6e to replica version 3d0b3f1" (IcOsVersionDeployment)
Summary: "Update subnet pzp6e-ekpqk-3c5x7-2h6so-njoeq-mt45d-h3h6c-q3mxf-vpeq5-fk5o7-yae to replica version [3d0b3f10417fc6708e8b5d844a0bac5e86f3e17d](https://dashboard.internetcomputer.org/release/3d0b3f10417fc6708e8b5d844a0bac5e86f3e17d)"
Proposed action: Execute NNS function DeployGuestosToAllSubnetNodes
Payload: (
  record {
    1_097_286_461 = principal "pzp6e-ekpqk-3c5x7-2h6so-njoeq-mt45d-h3h6c-q3mxf-vpeq5-fk5o7-yae";
    2_560_866_249 = "3d0b3f10417fc6708e8b5d844a0bac5e86f3e17d";
  },
)
Proposal ID: 131694
Created at Aug 08 2024 13:00:38 UTC by neuron 80
Status: Executed, reward status: AcceptVotes
Decided at Aug 08 2024 13:01:53 UTC
Executed at Aug 08 2024 13:01:55 UTC
Deadline: Aug 12 2024 13:00:38 UTC
Rejection cost: 10.00000000 ICP
Current tally: Y 475720489.82021435 (99.43%), N 234104.90888499 (0.05%) as of Aug 08 2024 21:25:37 UTC

"Update subnet nl6hn to replica version 3d0b3f1" (IcOsVersionDeployment)
Summary: "Update subnet nl6hn-ja4yw-wvmpy-3z2jx-ymc34-pisx3-3cp5z-3oj4a-qzzny-jbsv3-4qe to replica version [3d0b3f10417fc6708e8b5d844a0bac5e86f3e17d](https://dashboard.internetcomputer.org/release/3d0b3f10417fc6708e8b5d844a0bac5e86f3e17d)"
Proposed action: Execute NNS function DeployGuestosToAllSubnetNodes
Payload: (
  record {
    1_097_286_461 = principal "nl6hn-ja4yw-wvmpy-3z2jx-ymc34-pisx3-3cp5z-3oj4a-qzzny-jbsv3-4qe";
    2_560_866_249 = "3d0b3f10417fc6708e8b5d844a0bac5e86f3e17d";
  },
)
Proposal ID: 131693
Created at Aug 08 2024 13:00:32 UTC by neuron 80
Status: Executed, reward status: AcceptVotes
Decided at Aug 08 2024 13:01:41 UTC
Executed at Aug 08 2024 13:01:43 UTC
Deadline: Aug 12 2024 13:00:32 UTC
Rejection cost: 10.00000000 ICP
Current tally: Y 475720508.86216562 (99.43%), N 234104.90636442 (0.05%) as of Aug 08 2024 21:25:41 UTC

To get detailed information about this proposal, take the value Proposal ID: 131693, in this case 131693, and input it into the get-proposal-info subcommand:

quill get-proposal-info 131693

Resources​

Need help?​

Did you get stuck somewhere in this tutorial, or feel like you need additional help understanding some of the concepts? The ICP community has several resources available for developers, like working groups and bootcamps, along with our Discord community, forum, and events such as hackathons. Here are a few to check out:

Next steps​

To finish the level 4 developer ladder section, you'll wrap up with Motoko level 4: